Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are long-lasting, durable and easy to maintain. They don't rot or rust like aluminum and timber.

It is important to clean and oil UPVC windows and doors on a regular basis. This will help prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great amount of damage to your home, making it extremely dangerous and possibly fatal. It is crucial to take the time to ensure that you're doing all you can to keep your windows in good shape.

For single pane windows it can be relatively simple to replace them, and the replacement will generally fit within the frame of the previous one easily. If windows with double glazed window repairs near me panes are joined by internal beading, it is more difficult to remove and replace the old panes. In this situation, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

Wearing eye protection and thick gloves is essential when you are planning to remove the glass by yourself. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not onto the floor, where they could be trampled.

It's a great idea cover the gap with tape after the glass has been removed. This will stop drafts and water from getting into your home until a professional comes out to fix the window. This will also provide an obstacle to stop intruders from getting into your home. If the distance between the window and the door is substantial, you may want to use a security screen that also includes a window. This will give you the best of both.

2. Sagging

uPVC windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows with sash. However, over time, they are susceptible to a range of issues like sagging. A sagging upvc Window repair windows can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it's crucial to act fast to stop the issue from becoming worse.

To fix a window that is sagging you can try repositioning the hinges. To do this, you'll need open the window so that you can get to the frame. With the screwdriver, you'll be able to remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after you have repositioned your hinges. If you're satisfied with the fit of your window repair, you can tighten screws to secure them in the right position.

If you cannot reposition the hinges, you may have to replace the seal. Over time rubber seals can lose their elasticity and dry out and cause them to lose tightness. It is important to replace your seal as quickly as you can to ensure that your uPVC window repair near me watertight and draughtproof.

uPVC handles may also become loose. This is often caused by screws that have loosened over time, but it can be due to the mechanism of the handle getting worn out. It's fairly simple to fix a loose uPVC handle. First, you'll need to close the window and then perform an initial test fit. The joints at the corners of the sash should be aligned with the joint on the casing. If it isn't, you can use the screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home and impact your ability to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a fairly simple fix that can be done by any DIY expert. Depending on how severe the issue is, the old caulking may need to be removed. It is essential to remember that when it is about uPVC window repairs you should not be tempted to apply too much caulk in order to make the area more difficult to clean and decrease the efficiency of your energy usage.

Make sure that the drainage holes do not have debris inside them and ensure that the sill pan is angled correctly to drain away from the window. In more serious situations, you may have to replace the window.

Mold spots and rotted sills are also signs of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the house.

It is also important to keep in mind that if the leakage is coming from between the glass of your double glazed window repairs-glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sliding. This can be easily repaired by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and open with ease it could be the hinges that are at the fault. They can be repaired by any DIYer who is skilled and are usually done within a few minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that use hinges and, like all mechanical parts, they will wear out over time. It's easy to change the hinges on a window however it is easier if someone helps hold the frame.

Verify that the uPVC hinges are open and closed in the correct direction. You can check this by looking for the arrows on each hinge. This indicates which way the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window in a particular way or due to inadequate installation at the factory. Sending us photos via our website is often enough to resolve the problem. We are always happy to give assistance.

Regularly lubricating hinges is also essential. Applying a light engineering lubricant to the hinges is a good method of doing this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also decreases the possibility of a window sticking and prevent corrosion. This is recommended to be done at least every year. WD40 or other solvent-based oils are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. The hinges can also become unbalanced due to wear, causing a gap where the sash meets frame. They can be repaired by giving them good clean, but if they are beyond repair it might be necessary to have them re-aligned or replaced. In addition, the interlock could also become disaligned. This is located on the hinge side and may need to be cleaned. In certain instances it might be necessary to replace them.

The next most common cause of draughts is the window repair seals. They are susceptible to being worn out or damaged over time and will allow air to escape through the gaps. Replacing these with high-quality weatherstripping is a good way to prevent draughts. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help in regulating indoor temperatures and will lessen the possibility of draughts.

Lastly, one of the most effective ways to reduce drafts is to use an draught excluder. These are usually fabric tubes that are filled with some sort of filler and can be put on top of your windowsill. They can help stop cold air from entering and keep your home warm and cozy!

With a little regular maintenance and repairs your windows made of upvc will continue to provide a great level of security and insulation for your home. It is crucial to recognize that all windows have a lifespan and eventually, they will reach an point at which it is more efficient to replace them than repair them. So, if you are experiencing issues with your Upvc windows, it is recommended to seek assistance from a professional immediately.