Protect Your Pride And Joy With The ghost immobiliser fitter Immobiliser

Ghost Immobiliser can safeguard your valuable possession from theft. This system is discreet & does not require additional key fobs to operate.

The device utilizes buttons on your vehicle (steering wheels doors, door panels and the centre console) to generate a unique pin code sequence that can be changed up to 20 times. This will then allow your vehicle to begin.

Simple PIN Code Change Process

Many homeowners are upgrading their security due to the rise in vehicle theft. There are a variety of security products that are available for sale including tracking systems, alarms and immobilisers. They're not all equally effective at protecting your car. While a tracking system may assist you in locating your car in the event of theft, it does not stop the crime from happening in the first place. An immobiliser, on the other hand does exactly what it says on the tin: it disables your car's engine so that it is unable to be started. The Autowatch Ghost is one of the most sophisticated options available, making it nearly impossible for thieves steal your car.

The ghost device makes use of the buttons on your car to create a unique sequence that must be entered to allow the engine to start. This can be accomplished using the indicator stalk windows or heater buttons. Additionally, there is also a mobile app which can act as an emergency PIN code override and allows the driver to operate the car without the button sequence. This is a great option when you wish to donate your car to valet parking or for maintenance. The immobiliser will stay in operation.

The Ghost is a unique and ingenious device that works in conjunction with the buttons on your vehicle rather than being a standalone unit. It is not only an effective deterrent for vehicle theft, but it can be used on future vehicles you may own. This makes it a much more cost-effective option than a traditional wheel lock.

Small, weatherproof device

The Autowatch Ghost Immobiliser is a sophisticated security device that shields your vehicle from key hacking and cloning. It also stops ECU swapping. It's a weatherproof, tiny device that communicates directly with your vehicle's ECU over the CAN data bus, which disables the engine. It can be installed in the vehicle without wiring and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices that are the most common method used by thieves to bypass existing immobilisers.

The benefit of using CAN data is that it operates in a silent manner when compared to conventional systems. It isn't detected by sophisticated RF scanning or code-grabbing technologies and is also unrecognizable by traditional diagnostic tools. The Autowatch ghost doesn't emit LEDs, but instead utilizes the buttons inside your vehicle, such as the steering wheel or centre console panels to create a unique, customizable disarm sequence. You can make this sequence up to 20 presses long for added security. The iPhone app allows a single, authorised connection using the pairing code unique to the Ghost and the communication between the two devices is encrypted.

The Ghost will stop car thieves from putting in an ignition key replacement or replacing the ECU in order to bypass the immobiliser. The engine can only be started if a valid PIN code has been entered. It can be temporarily operated in Valet/Service mode (with parameters set, such as 30mph speed limit), so you can offer your vehicle to a valet or service without needing to enter an entry code.

Tested for each vehicle

The Autowatch Ghost is a first-of-its-kind aftermarket CANbus immobiliser. It can be connected to the wiring of your vehicle and also to the engine control unit (ECU). The device detects electronic signals to block the system of your vehicle from going through its normal start-up routine until you input an individual passcode. The system can be turned on and off using your own smartphone app without the need for wires.

Standard factory immobilisers for automobiles function through a transponder built into the key that sends a signal to the ECU. The car will start when the correct code is transmitted. However, if the transponder from another vehicle is used instead, the immobiliser doesn't recognize it. This allows the vehicle start and be stolen. A South African company that is at the forefront of safety systems technology created the Ghost immobiliser. It shields your vehicle from hacking, key cloning and even key theft. The only way that a burglar could steal your car is physically towing it away, and even then they would not be able to drive it.

Ghost makes use of buttons in your vehicle, such as the indicator stalk, the steering wheel, and the doors, to generate an individual PIN code that must be entered to use your vehicle. This is done without the need for extra hardware such as key fobs and can be up to 20 presses long. It is also unrecognizable by equipment for diagnostics and does transmit radio frequency signals, meaning thieves cannot use sophisticated RF scanners or code grabbing techniques to determine if an installation has been made.

Contrary to physical anti-theft devices such as wheel locks or clamps, local ghost installer immobiliser problems (just click the following page) is concealed within the vehicle to ensure that it can't be disabled or removed by thieves. It is more difficult to remove than a car alarm, which requires disarming with the use of a button sequence. This makes it a great supplement to a GPS tracker, which can help locate your vehicle after it has been stolen.

Override of emergency PIN code

You don't have how to become a autowatch ghost installer look far on social media sites to find stories or even videos of vehicles that have been stolen by thieves using the latest technology tools available to them. This includes key-cloning devices and hacking tools that allow them to start the car without the original keys.

Our Ghost immobiliser is designed to combat this, and give you an extra layer of security to prevent your vehicle from being targeted by thieves. It generates a unique pin code when pressing the buttons on your steering wheel, door panel and on the centre console. The unique pin code must be entered in conjunction with your original key fob in order to prevent the vehicle from starting. The unique override pin can be found on a black plastic card which you will receive following the installation. It is simple to remember because there are no LED indicators.

The device is hidden inside the vehicle's wires, and doesn't emit any radio signals, therefore it can't be identified by modern thieves with diagnostic software that can detect the type of security system you have installed. This makes it an excellent alternative to a tracker.

Unlike most other security systems that have a relay inside the engine bay, CANBUS Immobilisers communicate with the vehicle's ECU and BCM via the CAN data bus (brand dependent). This allows them to disable a vehicle completely, by sending an electronic block to the ECU and engine.

It is also possible to connect an analogue immobiliser, alarm or tracker with these systems, however this must be specified prior to installing the device. They are also compatible with valet and service modes, and are is a great alternative to a tracker device when you take your car to the dealer to address an electrical issue.

Service/Valet mode

In recent years, there has been a rise in the number of vehicles being stolen without the owners keys. With the ease of access to key cloning equipment & door lock pick sets, it is now easier than ever for thieves to steal your prized possessions. We have developed the Autowatch Ghost Immobiliser to combat this. It prevents your car from being driven, even if your keys have been copied.

It directly communicates with your car's ECU (Engine Control Unit) via the data loop called CAN. It's completely silent since it doesn't use radio frequency or keys fobs. This means that it can't be detected by diagnostics or any other car hacking devices. It also prevents you from introducing an ECU or key to bypass the system, since only the PIN code allows the engine to start.

The device is hidden within your car and can be reached via the buttons on your steering wheel, center console, and door panels. Before you can begin your vehicle, you must enter a unique and reversible PIN number that is up to 20 digits.

This is the first aftermarket immobiliser for CAN bus to be developed that can prevent your car being driven away or started without a PIN code being entered before. If the device is activated and you try to drive off it will display an indication on your dash that will flash continuously for about 300m. If you enter your PIN code at this point, it will disable the anti-hijack system and your vehicle will continue to drive in the normal way. If you do not enter your PIN at this point, the indicator will continue to flash and will require a new PIN code for every attempt to start your vehicle.