Protect Your Pride And Joy With The Ghost Immobiliser

Ghost Immobiliser will safeguard your prized possession from theft. It's discreet and does not require any additional key fobs.

The device uses existing buttons in your vehicle (steering wheel doors, door panels, and the centre console) to create a unique changeable pin code sequence of up to 20 presses. This then authorizes the vehicle to start.

Simple process to change the PIN code

With the increasing rate of vehicle theft, many owners are looking to improve their security. There are a variety of aftermarket security devices, from tracking systems to alarms and immobilisers. However there are a few that are equally effective in protecting your car. While a tracking system may assist in finding your vehicle in the case of theft, it will not prevent the crime from occurring in the first in the first place. Immobilisers, however perform exactly as they say on the label - they shut down the motor of your car to prevent it from being started. The Autowatch ghost immobiliser car immobiliser is one of the most advanced options on the market, making it virtually impossible for thieves to take your car.

Using the existing buttons in your car The ghost device is able to create a unique sequence which must be entered before the engine will start. This can be done using the indicator stalk or window buttons. Additionally it is possible to use an app on mobile that can act as an emergency PIN code override and allows the driver to operate the car without the button sequence. This is especially useful if you need to give your car away for valet parking or maintenance, as the immobiliser will still be activated, but not disabled.

The Ghost is an unique and innovative device that works with the buttons of your vehicle instead of as a separate unit. It is not only an effective deterrent to vehicle theft however, it can be used to secure any future vehicles you own. This makes it a far better investment than a traditional wheel lock.

Small, weatherproof device

The Autowatch local ghost immobiliser installer immobiliser is a sophisticated security system that protects your car from key cloning, hacking & ECU swapping. It's a weatherproof and small device that connects directly to your vehicle's ECU over the CAN data bus, which disables the engine. It can be installed in the vehicle without wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It is also resistant against jamming devices that are a popular method used by car thieves to circumvent immobilisers.

The advantage of using CAN data is that it operates in a silent manner when compared to conventional systems. It is not able to be detected by sophisticated RF scanning and code-grabbing technologies as well as recognized by conventional diagnostic tools. The autowatch ghost installation Ghost does not employ LED indicators but instead utilizes buttons on your vehicle, like the steering wheel, centre console, or doors, to create an unique sequence of disarming. You can create a sequence that is up to 20 presses long for added security. The iPhone app lets you make one, authorized connection with the pairing code unique to the Ghost and communication between the two is encrypted.

The Ghost will stop car thieves from putting in a new ignition key or replacing the ECU in order to bypass the immobiliser. The engine can only be started when a valid PIN code is entered. It can be temporarily operated in valet or service mode (with the appropriate parameters, like a 30mph speed limit) and, therefore, you can offer your vehicle to valet or service without needing to enter an entry code.

Each vehicle is tested

The Autowatch ghost immobiliser And Tracker is a world-first aftermarket CANbus immobiliser. It can be connected to the vehicle's wiring and to the engine control unit (ECU). The device detects electronic signals to disable the system of your vehicle from going through its normal startup routine until you input an individual passcode. The system can be activated and deactivated by using your smartphone's app without the need for additional wires.

The standard factory immobilisers function by using a transponder that is embedded in the key. This transmits a signal to the ECU. If the correct code is sent, the car will start, but if a transponder is replaced by one from another vehicle the immobiliser cannot recognize it. This makes it possible for the vehicle to start and be stolen. The Ghost immobiliser has been developed by an South African company at the top of security systems for vehicles technology. It shields you from hacking or key cloning, and even key theft. The only way a thief could steal your car is physically towing it away and even then, they would not be capable of driving it.

ghost immobiliser tracker utilizes the buttons of your vehicle including the indicator stalk as well as the steering wheel and door panels to generate an unique PIN code that is changeable that needs to be entered before you can use your car. This is done without additional hardware, like keys fobs. It can take up to 20 presses. It is also undetectable to diagnostic equipment and does not transmit radio frequency signals, which means thieves are unable to use sophisticated RF scanning or code-grabbing technology to determine if a security system has been installed.

Unlike physical anti-theft devices like wheel locks or clamps, Ghost is covertly integrated into the vehicle so it can't be taken away or disabled by thieves. It is even more difficult to get rid of than a car alarm that requires disarming via the use of a button sequence. This makes it an excellent complement to an GPS tracking device, which can be used to track your vehicle after it's been taken.

Emergency PIN code override

You don't need to look far on social media to find stories or even videos of vehicles that have been taken by car thieves using the latest technology tools available to them. This includes key-cloning devices and hacking tools that allow them to start the vehicle with your original keys.

Our Ghost immobiliser fights this issue and offers an additional layer of security to stop your vehicle from being stolen in the event of being targeted by thieves. It creates an individual pin code by pressing the buttons on your steering wheel, door panel, and centre console. This unique PIN has to be entered in conjunction with your original key fob in order to prevent the vehicle from starting. The unique override pin can be found on a black card that you will receive after the installation. It is simple to remember because there are no LED indicators.

The device is hidden in the vehicle's wiring and does not emit radio signals. This means it can't be detected by diagnostic software which can identify what type of security systems you have installed. This makes it an excellent alternative to an electronic device for tracking.

Contrary to most security systems, which have an engine relay bay, CANBUS Immobilisers communicate with the vehicle's ECU and BCM via the CAN data bus (brand dependent). This allows them to block the vehicle completely by sending an electronic block to the ECU and engine.

These systems can also be connected to a separate alarm, immobiliser or tracker. This should be decided prior to installation. They are also service/valet-mode compatible and a good alternative to a tracker when you have your car checked for repairs to an electrical issue at the dealer.

Service/Valet Mode

In recent years there has been a rise in the number of vehicles being stolen with the owners' keys. With easy access to key cloning equipment and door lock pick sets, it is now easier than ever for thieves to steal your pride and joy. To stop this, we have launched the Autowatch ferrari ghost installer immobiliser that prevents your car from being driven even if your keys have been cloned or your vehicle was stolen.

It directly communicates with your car's ECU (Engine Control Unit), via the CAN data loop. It is completely silent, as it does not use radio frequencies or key fobs. It can't be detected by diagnostics or any other hacking device. It also shields against the possibility of adding an additional key or replacing the ECU to get around the system as only the correct PIN code will allow the engine to start.

The device is hidden inside your car and is accessed by existing buttons on your steering wheel, center console and door panels. Before you can begin your vehicle, you must enter a unique and reversible PIN code that can be as long as 20 numbers.

This is the first aftermarket CAN bus immobiliser to be developed that can prevent your car being moved away or even started without a PIN code being entered first. If the device is armed and you try to drive off it will display an indication on your dash, which will flash on a regular basis for approximately 300m. If you type in your PIN code at this point, it will deactivate the anti-hijack device and your car will continue to operate just as normal. If you do not enter your PIN at this point, the warning will continue to flash and require another PIN code for every attempt to start your car.