Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to rot or rust like timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will help prevent unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge amount of damage to your home, making it very dangerous and potentially fatal. It is important to take the time to ensure that you're doing everything you can to keep your windows in good repair.

For single pane windows it is fairly easy to replace windows, and the new one will generally fit within the frame of the previous one easily. If you have double-paned windows that are joined by internal beading, it is harder to remove and replace the old panes. In this case you'll need locate some plastic spacers to aid the new pane in being able to fit properly into the frame of the window.

If you plan to try to remove the window panes yourself, it is essential to wear the appropriate safety equipment, including thick gloves and eye protection. You should also lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor which could cause them to be trampled under.

It's a great idea cover the gap with tape after the glass has been removed. This will keep drafts and water from entering your home until a professional arrives to repair the window. This will also act as a barrier that will prevent any intruders from getting access into your home. If the gap is particularly large, you may think about an alarm door that comes with an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective, durable and energy-efficient alternative to timber sash windows. However, over time, they can suffer from a variety of issues, including sagging. A window repairs near me that isn't properly aligned can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it's crucial to act fast to prevent the problem from getting worse.

To fix a window repair near me that is sagging you can try repositioning the hinges. First, you'll need to open the windows to reach the frame. With a screwdriver, you can unscrew the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after having relocated your hinges. If you're satisfied with the fit of the window, tighten the screws to keep them in place.

If you are unable to reposition the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and become dry which causes their tightness to decrease. If this happens, it's crucial to replace the seal as soon as you can to ensure that your uPVC windows are waterproof and secure from draughts.

UPVC handles can also become loose. This is typically caused by screws that have been removed over time, but it could be due to the mechanism of the handle wears out. It's fairly simple to fix a loose uPVC hand. You'll first need to close the window and then perform an experiment fitting. The joint at the corner of the sash should align with the joint on the casing. If it does not then you can use the screwdriver to loosen the handle. Then turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and mouldy walls every time it rains it's crucial to take action. Leaks of water from windows can cause structural damage to your home, and hinder your ability to control the temperature of your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or not present.

This is a fairly simple fix and should be undertaken by any DIY expert. Based on the severity of the problem the caulking used previously may need to be removed before a new layer is applied. It is important to remember that when it is about upvc window Repair window repairs, do avoid the temptation to "over-caulk in order to make the area more difficult to clean and reduce the efficiency of your energy.

It is crucial to make sure that any drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more serious situations, you might need to consider replacing the window.

Moldy sills and rotten ones are other signs of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed glass it is more likely that the issue is with the seal rather than the frame. This can be easily fixed by an uPVC window repairs near me specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and open with ease it could be hinges at fault. Any competent DIYer can replace the hinges in a matter of minutes.

Almost every household in the UK will have either top hung or side-hung uPVC windows that use hinges and, just like any mechanical component they will wear out over time. It is an easy procedure, but it is easier to do if you have someone to help hold the frame in place.

It is also important to ensure that the upvc window repair hinges are opened and closed in the right direction. You can check this by looking for the arrows on each hinge, this indicates which way the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window a certain manner or because of inadequate installation at the factory. This issue can be fixed by sending us a photograph via our website and we will be pleased to offer you suggestions.

Regularly lubricating hinges is also essential. Applying a light engineering lubricant on the hinges is an ideal method of doing this. We suggest using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It also helps prevent corrosion and reduce the possibility of sticking. Ideally, you should perform this every year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your upvc window repairs near me window.

5. Draughts

Draughts in windows made of upvc can be caused by a few different things. First, the hinges because of wear and tear, can become misaligned, this causes an opening to appear between the sash and the frame. This can be easily fixed by giving them a good cleaning, but if they are beyond repair it could be necessary to get them aligned or replaced. The second is the interlock, which is on the hinge side of the window and can be misaligned. Again, it may be possible to give them a clean but in some cases it might be necessary to get them replaced.

The seals may wear out or be damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glass. This will help to regulate indoor temperatures and lessen draughts.

The last way to reduce draughts effectively is by using a Draught-exclusion device. These are typically fabric tubes filled with a filler that can be put on top of your window sill. They can keep your home warm by blocking out cold air.

Your upvc windows can keep providing excellent insulation and security in your home with regular maintenance and repairs. It is crucial to recognise that all windows have a lifespan and there may come a point where it is more efficient to replace them than repair them. If you have any problems with your upvc window it is recommended to speak with an expert immediately.