Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they do not rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will reduce costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge amount of damage to your home, making it extremely dangerous and possibly fatal. You should take the time to make sure that your windows are in good working order.

For single pane windows it is relatively easy to replace them, and the new window is usually able to fit into the frame of the previous one easily. If you have double glazed window repairs near me-paned windows that are joined by internal beading, it is harder to remove and replace the panes that were previously in use. In this instance, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass by yourself. You should also lay down a dropcloth prior to you begin working on the window panes, so that any shards of glass fall onto the fabric and not onto the floor which could cause them to be trampled.

It's a good idea to cover the gap with tape after the glass is removed. This will prevent drafts and water from entering your home until a professional is able to fix the window. This will also provide an obstacle to stop criminals from getting into your home. If the gap between the window and the door is significant, you may need to consider security screens that has windows. This will provide the best of both.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber sash windows. However, over time, they are susceptible to a range of issues like sliding. A sagging window can cause problems with light, draughts or even security. It's crucial to act as soon as you discover that your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window that is sliding. To do this, you'll need open the window to get to the frame. With the screwdriver, you'll be able to remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after having relocated your hinges. If you're happy with the fit, tighten the screws to ensure they stay in place.

If you cannot reposition the hinges, you might have to replace the seal. Rubber seals may dry out and lose their elasticity over time, causing them to lose their tightness. It is crucial to replace your seal as quickly as you can in order to keep your upvc window repair near me window watertight and draughtproof.

uPVC handles could also become loose. Most often this is due to screws that have become loose over time. However, it can occur because the handle mechanism has worn out. Fortunately, it's easy to repair the handle of a window that is loose yourself. First, you'll need to close the window and then perform a test fit. The corners of the sash need to align with the casing joint. If it isn't then you can use the screwdriver to loosen up the handle. Then, turn the mechanism into position.

3. Water Leaks

If you're waking up to damp floors and mouldy walls each time it rains, it's important to take action. Water leaks from windows can not only cause degradation of your home's structure but also undermine your efforts to control the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix and should be undertaken by any DIY expert. Depending on the severity of the issue is, the old caulking may have to be removed. It is important to keep in mind that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and can reduce the efficiency of your energy.

Check that any drainage holes do not have debris in them and ensure that the sill pan is properly angled to drain away from the window. In more serious situations, you might have to consider replacing the window.

Mold spots and rotted sills are another sign of water leakage. This mold thrives in damp environments and is able to quickly spread throughout the house.

If the leakage occurs between the double glazed window repairs near me-glazed glass, it is more likely the problem is with the seal than the frame. This can be easily corrected by a uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window repairs near me is difficult to open or if it opens in an ease. They can be repaired by any DIYer who is skilled and can be completed in a matter of minutes.

Like any mechanical component hinges are prone to wear out over time. Changing a window hinge is essentially a simple process but it can be simpler with someone else to assist in holding the frame in place.

It is also important to ensure that the upvc window repairs near me hinges are being opened and closed in the right direction. This can be done by looking for the arrow on each hinge, this indicates the direction in which the window should open.

Faulty window hinges can be caused by incorrectly opening the window a certain way or by improper installation in the factory. It is usually possible to fix the issue by sending us a photograph through our website and we will be pleased to offer you suggestions.

It is also essential to lubricate the hinges regularly. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also reduce the risk of a window sticking and prevent corrosion. This is recommended to be done at least once a year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a variety of various factors. The hinges can also become unbalanced due to wear, which can cause gaps where the sash meets frame. If they're beyond repair, it could be necessary to get them re-aligned. The interlock, which is located on the hinge of the window, may also become misaligned, again it may be possible to give them a good clean, but in some cases it might be necessary to have them replaced.

The next most common reason for draughts are the window seals, these are prone to wear or damaged over time and will allow air to escape through the gaps. Replacing these with high-quality weatherstripping will help to keep draughts at bay. Another option is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures and will lessen draughts.

Another, and most effective methods to reduce drafts is to use a draught excluder. These are typically fabric tubes that are filled with some type of filler. They can be placed on the top of your windowsill. They can help stop cold air from entering and keep your home warm and cozy!

With a little maintenance and repair, your upvc windows will continue to provide a great level of insulation and security for your home. However, it is important to realize that all windows have a lifespan and they may reach the point when it's more efficient to replace them than fix them. If you have any problems with your upvc window, it's best to consult a professional as soon as possible.